Removing and installing/replacing trim for left or right A-pillar

Removal: 

Disengage trim (1) by shifting downwards slightly and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Release the trim (1) at clips (2) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Clip in the trim (1) at clips (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Mount trim (1) and engage by shifting upwards.

Courtesy of BMW OF NORTH AMERICA, INC.