Removing and installing/replacing left fog light (Cooper)

Preliminary work needed: 

• Partially release front left WHEEL ARCH COVER .

Removal: 

Unlock and disconnect the connector (1).

Loosen screws.

Feed out fog lights (2) toward side.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Feed in fog light (2) and tighten at screws.

Tightening torque 63 17 1AZ .

Connect the connector (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Secure front left WHEEL ARCH COVER .

On replacement of fog light or bumper cover at front: 

If necessary, remount bulb(s).

Adjust front FOG LIGHTS .