REP-TAT-P-6312-01 Remove headlight
NOTE:
Description is for left component only. Procedure on the right side is identical.
NOTE:
Perform the steps on the left and right side.
- If the screw is stuck: Counter-hold the square nut (1) on the adjusting element with water pump pliers (2).
- Unscrew screws (2) on the headlamps (1).
- Unlock and disconnect the connector (arrow) on the headlight (3).
- Unclip cable bracket from headlamp (3).
- Loosen screws (1) and (2).
- Remove headlamp (3).