Removing and installing/replacing ultrasound sensor for parking assistant (Cooper)

Preliminary work needed: 

• Partially remove front left or right WHEEL ARCH COVER .

Removal: 

Unfasten plug connection (1) and disconnect.

Unlock latches at marked points.

Pull ultrasonic transducer (2) out of holder.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Engage ultrasonic sensor (2) in holder.

Join and lock plug connection (1).

Make sure ultrasonic sensor (2) is securely seated.

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install front left or right WHEEL ARCH COVER .