Replacing the emergency battery for the telematics control module in the vehicle interior (behind the glove compartment) (after vehicle diagnosis) (Cooper)

Preliminary work needed: 

• Remove telematics CONTROL MODULE .

Removal: 

Open lid (1) on telematics control module (2) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug.

Remove the emergency battery (1) from the telematics control module (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Connect connector.

Insert the emergency battery (1) into telematics control module (2) and connect the connector.

Courtesy of BMW OF NORTH AMERICA, INC.

Position and close lid (1) on telematics control module (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install telematics CONTROL MODULE .