Removing and installing/replacing fuel level sensor (gasoline) (Cooper)

Preliminary work needed:

Removal:

Disconnect plug connection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock locking tab (1) and remove fuel level sensor (2) in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install fuel level sensor (1) in the direction of the arrow.

IMPORTANT: Make sure the fuel level sensor engages correctly (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Connect plug connection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: