Replacing wiper arm for rear wiper on left
Special tools required:
- 61 6 210
Removal:
Remove protective cap (1) in an upward direction.
Slacken nut (1).
Press off wiper arm (2) with special tool 61 6 210.
Remove wiper arm (2).
Installation:
Replacement:
- Remount WIPER BLADE for rear wiper.
NOTE:
Rear wiper must be in rest position.
Position wiper arm (2).
NOTE:
The wiper arm should be parallel to the rear window edge.
Tighten nut (1).
Tightening torque 61 62 1AZ .
Mount protective cap (1).