Removing and installing/replacing left wiper motor

Preliminary work needed: 

• Remove WIPER ARM  for rear wiper.
• Remove left SPLIT DOOR TRIM PANEL .

Removal: 

Disconnect plug connection (1).

Unscrew the screws (2).

Feed wiper motor (3) out of grommet (4).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Slide wiper motor (3) into grommet (4).

Tighten down screws (2).

Tightening torque 61 21 2AZ .

Connect plug connection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install WIPER ARM  for rear wiper.
• Attach TRIM PANEL OF SPLIT DOOR , left