13 62 591 Replacing the charging pressure sensor (on the intake system)

WARNING: This page is about a different car, the 2017 MINI Cooper, 2016 MINI Cooper, 2015 MINI Cooper, and 2014 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Removal:

Unlock connector (1) and pull off.

Unclip charging pressure sensor (2) and remove.

Fig 1: Charging Pressure Sensor And Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Preparation for installation:

Check sealing ring of charging pressure sensor and replace in case of damage.

Prior to installation, apply a thin coat of anti-friction agent to sealing ring of charge-air pressure sensor.

Installation:

Install charging pressure sensor (2).

Attach connector (1).

Connector (1) must engage audibly.

Fig 2: Charging Pressure Sensor And Connector

Courtesy of BMW OF NORTH AMERICA, INC.