Removing and installing/replacing the chain tensioner (B48 and B46 engine) (Cooper S and John Cooper Works)

Preliminary work needed: 

• Remove CATALYTIC CONVERTER .

Removal: 

Release chain tensioner (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If the chain tensioner is reused, its oil chamber must be drained.

Place chain tensioner on a level support and slowly compress.

Repeat process twice.

Courtesy of BMW OF NORTH AMERICA, INC.

Parts:  Replace sealing ring (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Release chain tensioner (1).

Tightening torque 11 12 5AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install CATALYTIC CONVERTER .