Install fan cowl with electric fan
NOTE:
TECHNICAL INFORMATION
Make sure that the connections are locked correctly. The locks must engage audibly.
Make sure that the connections are locked correctly. The locks must engage audibly.
- Feed the guides (arrows) of the fan cowl (1) into the charge air cooler.
- Feed in and install the fan cowl (1) in the direction of the arrow.
- Lock the left and right locks (arrows).
- Tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION
| Fan cowl on radiator | |
| M6X12 | 8Nm |
- Connect connectors (1) and lock.
The connector (1) must engage audibly.
- Secure clamps (2).
- Thread in and install coolant line (3).
- Guide the seal (1) in and install it.
Follow-up work
- Refer to INSTALLING CROSS CONNECTION .
- Refer to INSTALLING INTAKE SILENCER HOUSING .
- Refer to INSTALLING INTAKE PORT .