Engine block
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Crankshaft bearing cap to crankcase (collar bolt) | B38M0/U0/B36M0 | M10x1.5 | Renew screws and screw in hand-tight. | |
| 1. Jointing torque | 25 Nm | |||
| 2. Angle of rotation | 60° | |||
| 3. Angle of rotation | 60° | |||
| 2AZ Oil spray nozzle in crankcase | B38M0/U0/B36M0 | M6 | 8 Nm | |
| 3AZ Bearing journal of tensioning and guide rail | B38M0/U0/B36M0 | M8 | Replace bolt. | 20 Nm |
| 4AZ Camshaft sprocket with ball bearing to crankcase | B38M0/U0/B36M0 | M12x1.5 | 108 Nm | |
| 5AZ Special tool/holder to crankcase | B38M0/U0/B36M0 | M10x35 | 40 Nm | |
| 6AZ Special tool 11 8 930 to special tool 00 2 300 | B38M0/U0/B36M0 | M14x35 | 160 Nm | |
| 7AZ Chain tensioner to crankcase | B38M0/U0/B36M0 | M6x22 | 10 Nm | |
| 8AZ Spacing screw for acoustic cover on engine block (AF 17) | B38M0/U0/B36M0 | M8x12 | 12 Nm | |