Removing and installing/replacing thrust field (Cooper Convertible)

Preliminary work needed: 

• Remove front UNDERBODY PROTECTION .

Removal: 

Loosen screws (1).

Loosen screws (2).

Remove underbody protection (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Position underbody protection (3).

Replace screws (2).

Parts  : screw

Tightening torque 31 11 4AZ .

Tighten down screws (1).

Tightening torque 31 11 5AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install front UNDERBODY PROTECTION .