Stripping Operations - Replacing Rear Quarter Panel, Right (Cooper, Cooper S, John Cooper Works)
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list essentially represents the disassembly sequence.
The following list essentially represents the disassembly sequence.
- Remove complete soft top (FR number: 54 34 101)
- Remove trunk lid (FR number: 41 62 000)
- Remove right tailgate hinge (FRU number: 41 62 043)
- Removing right side trim panel (FR number: 51 43 002)
- Remove right power electric windows (FRU number: 51 37 000)
- Remove lock striker for right door (FRU number: 51 21 003)
- Remove right door edge protection (FRU number: 51 72 000)
- Remove right door sill cover strip (FRU number: 51 47 000)
- Remove right wheel arch trim (FRU number: 51 13 105)
- Remove bumper cover (FRU number: 51 12 156)
- Remove bumper bracket (FRU number: 51 12 050)
- Remove guide for bumper on rear right (FR number: 51 12 828)
- Remove tail panel trim at top (FR number: 51 46 050)
- Remove luggage compartment floor covering (FR number: 51 47 101)
- Remove right luggage compartment wheel arch trim panel (FR number: 51 47 151)
- Remove the trim panel for the right storage shelf (FRU number: 51 46 03)
- Remove right door sill trim panel (FRU number: 51 71 426)
- Remove right wheel arch cover (FRU number: 51 71 041)
- Remove cover housing (job number: 41 63 003)
- Remove right tail light (job number: 63 21 180)
- Release seal for rear lid