61 61 021 Replacing left or right windshield wiper blade
IMPORTANT:
Make sure the wiper arm does not come in contact with the windshield without its wiper blade.
NOTE:
In the event of a customer complaint
regarding the cleaning or wiping performance or noise build-up (scratching, squeaking) by the wiper blades, proceed as follows: First check
whether the complaint is caused by dirt (preservation wax on new vehicles, resins or other environmental influences) on the windshield; if necessary, clean the windshield thoroughly!
Replace the wiper blades only if cleaning the windshield fails to remedy the situation.
Removal:
Remove ID transmitter (ignition key).
Fold out wiper arm (2).
Open lock (1).
Feed wiper arm (2) in the direction of the arrow out of the wiper blade (3).
Installation:
Feed wiper arm (2) against the direction of the arrow into the wiper blade (3).
Close lock (1).
Fold in wiper arm (2).
NOTE:
Make sure wiper blade (3) is seated correctly.
IMPORTANT:
Before switching on terminal "R" or the ignition or starting the engine, you must fold the wiper arms onto the windshield to avoid any damage.