Removing and installing/replacing chain tensioner (B36 engine) (Cooper base)

Preliminary work needed: 

• Remove CATALYTIC CONVERTER .

Removal: 

Courtesy of BMW OF NORTH AMERICA, INC.

Release chain tensioner (1).

Installation: 

If the chain tensioner is reused, its oil chamber must be drained.

Place chain tensioner on a level support and slowly compress.

Repeat process twice.

Courtesy of BMW OF NORTH AMERICA, INC.

Parts:  Replace sealing ring (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Release chain tensioner (1).

Tightening torque 11 12 5AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install CATALYTIC CONVERTER .