Replacing the front deformation element on the bottom left (Cooper Convertible)

Preliminary work needed: 

• Remove front bottom support for BUMPER COVER .

Removal: 

Only MINI Coopers  :

Release expanding rivet (1).

Remove screw (2).

Feed out air duct (3) from guide (4) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1 to 3).

Remove deformation element (4).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Courtesy of BMW OF NORTH AMERICA, INC.

Insert deformation element (4).

Tighten screws (1 to 3).

Screw	Tightening torque
(1)	51 11 9AZ .
(2)	51 11 4AZ .
(3)	51 11 5AZ .

Only MINI Coopers: 

Feed in air duct (3) with guide (4) into holder.

Secure air duct (3) with screw (2) and expanding rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install front bottom support for BUMPER COVER .