Installing flat motor for front power windows

• Fit the flat motor for the power window in the arrow direction so that the shaft (1) of the flat motor fits without tension in the gearing (2) of the power window (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Flat motor to power electric windows
  screw
  	Tightening torque	4.5Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING POWER WINDOW REGULATOR IN THE FRONT DOOR .
• Refer to INSTALLING THE SOUND INSULATION ON THE FRONT DOOR .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to INSTALL THE WINDOW CHANNEL STRIP ON THE FRONT DOOR ON THE OUTSIDE .
• Refer to INITIALIZING THE POWER WINDOWS .