Completely install the rear power window

• Insert the power electric windows completely (2) into the inner door panel.
• Tighten nuts (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Power electric windows to rear door
  Self-locking combination hex flange nut
  	9.5Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1) on the flat motor (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Operate the power electric windows and carefully shift it up until the holder (1) is engaged correctly with the door window glass (2).
• Remove the adhesive tape.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALL SOUND INSULATION ON THE REAR DOOR .
• Refer to INSTALL REAR DOOR TRIM .
• Refer to INSTALLING THE OUTER WINDOW CHANNEL STRIP ON THE REAR DOOR .
• Refer to INITIALIZING THE POWER WINDOWS .