Remove front bumper cover

Loosen screws (1).
If necessary, release screws (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.
Loosen the expanding rivet (1).
Loosen screws (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.
Unclip the wheel arch trim (1) on the side.
Loosen screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Pull the bumper cover (1) slightly forward with the help of another person.
Unlock and disconnect all associated plug connections.

Courtesy of BMW OF NORTH AMERICA, INC.