Install tail light

• Connect and lock the connector (1) to the tail light (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the tail light (2) in the direction of the arrow.
• Tighten the nuts (1) on the tail light (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Check the detents (1) of the water channel cover (2) for damage and replace the water channel cover (2) as needed.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the water channel cover (1) on the bottom and clip it in forward.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lock the twistlocks (1) of the tail light (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SERVICE CAP FOR THE TAIL LIGHT .