51 22 330 Removing and installing/replacing the window channel strip on the inside of the rear door (Countryman 2017-2023, except PHEV)

Preliminary work needed: 

• REMOVE  rear door trim panel

  The "INSTRUCTIONS ON INSTALLATION OF WINDOW GUIDES " serve as the basis for this repair instructions and must be observed without fail.

  IMPORTANT: Risk of damage!
  If window channel strip is reused, make sure it is not bent.

  Removal: 

  Release window channel strip (1) from holders (2) and detach upwards.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Installation: 

  Coat window channel strip (1) prior to installation with APPROVED LUBRICANT .

  If necessary, remove clamps (2) from window channel strip and attach to door.

  Replace faulty clamps.

  Connect window channel strip (1) to door and engage in holders (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  Required follow-up work: 

  • Install REAR DOOR TRIM .