LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2017 >> Cooper Countryman JCW ALL4, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment -- Repair Cooper Countryman (F60) >> 51 71 Gaskets And Loose Body Parts >> Removing and installing/replacing right (rear) suspension cross-brace (Countryman 2017-2023, except PHEV)

Removing and installing/replacing right (rear) suspension cross-brace (Countryman 2017-2023, except PHEV)

IMPORTANT: Driving without the strut brace is not permitted! (risk of damage to the body).

Preliminary work needed: 

Removal: 

Remove screw (1).

Slacken nut (2).

Remove suspension cross-brace (3).

G15373439Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install strut brace (3).

Tighten nut (2).

Tightening torque 51 61 2AZ .

Tighten screw (1).

Tightening torque 51 61 3AZ .

NOTE: Make sure suspension cross-brace (3) is in correct installation position.
G15373439Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

scientia non olet · About LEMON Manuals