1131 CAMSHAFT (Countryman S FWD, Countryman S ALL4 AWD, Countryman JCW ALL4 AWD)

1131 TIGHTENING TORQUE OVERVIEW

Basic carrier to cylinder head
M6		Tightening torque	8 Nm
Bearing journal to crankcase
Bearing journal Replace bearing journal.		Tightening torque	20 Nm
Camshaft sensor wheel to intake camshaft
M6x16		Tightening torque	8 Nm
Camshaft sensor wheel to intake camshaft
M6x16 Replace screw.		1. Tightening torque	5 Nm
		2. Angle of rotation	90°
Chain tensioner to cylinder head
Chain tensioner		1. Joining torque	20 Nm
		2. Angle of rotation	40°
Exhaust camshaft to cylinder head
M6	Tensile strength of screw 8.8	1. Joining torque	9.6 Nm
		2. Tightening torque	9.6 Nm
M6	Tensile strength of screw 10.9	1. Joining torque	11.8 Nm
		2. Tightening torque	11.8 Nm
Intake camshaft to cylinder head
M6	Tensile strength of screw 8.8	1. Joining torque	9.6 Nm
		2. Tightening torque	9.6 Nm
M6	Tensile strength of screw 10.9	1. Joining torque	11.8 Nm
		2. Tightening torque	11.8 Nm
Test gauge to basic carrier
M6		Tightening torque	8 Nm