3100 General Front Axle Technical Data

31 00 FRONT AXLE - RIDE HEIGHT F60 / FRONT - TECHNICAL DATA SPECIFICATION

Ride height in normal position: Attach tape measure to bottom middle of rim flange and measure to lower edge of wheel arch
Tolerance ride height in NORMAL POSITION maximum ±10 mm DESIGN POSITION maximum ±2 mm
Difference ride height between left/right in NORMAL POSITION 10 mm DESIGN POSITION 2 mm
Standard suspension	mm
16" wheel rim	623
17" wheel rim	639
18" wheel rim	651
19" wheel rim	664
Sports suspension settings, not lowered
16" rim	623
17" wheel rim	639
18" wheel rim	651
19" wheel rim	664

31 00 GENERAL - TRACK WIDTH / WHEELBASE F60 - TECHNICAL DATA SPECIFICATION

Track width for normal position and rim offset (ET)
-Rim offset 39	mm	1589
-Rim offset 41	mm	1585
-Rim offset 47	mm	1573
-Rim offset 51	mm	1565
-Rim offset 52	mm	1563
Wheelbase	mm	2670

31 00 FRONT AXLE - RIDE HEIGHT F60 / ALL-WHEEL - TECHNICAL DATA SPECIFICATION

Ride height in normal position: Attach tape measure to bottom middle of rim flange and measure to lower edge of wheel arch
Tolerance ride height in Normal position maximum ±10 mm Design position maximum ±2 mm
Difference ride height between left/right in Normal position 10 mm Design position 2 mm
Standard suspension	mm
16" wheel rim	623
17" wheel rim	639
18" wheel rim	651
19" wheel rim	664
Sports suspension settings, not lowered
16" rim	623
17" wheel rim	639
18" wheel rim	651
19" wheel rim	664
John Cooper Works chassis
16" rim	623
17" wheel rim	639
18" wheel rim	651
19" wheel rim	664