Gaskets and loose body parts
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUES SPECIFICATIONS - GASKETS AND LOOSE BODY PARTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wheel arch cover to body | F54/F55/F56/F57/F60 | 3 Nm | ||
| 2AZ Lashing point to body | F54/F55/F56 | 19 Nm | ||
| 3AZ Rear spoiler to trunk lid (middle) | F55/F56 | 3 Nm | ||
| 4AZ Rear spoiler to trunk lid (outer) | F55/F56 | 2 Nm | ||
| 5AZ Underbody protection | F54/F55/F56/F57/F60/F45/F46/F48/F49/F52 | 3 Nm | ||
| F52 | M6 | 8 Nm | ||
| 6AZ Air flap control to support | F54/F55/F56 | 6 Nm | ||
| 7AZ Rear spoiler to body | F54 | 3 Nm | ||
| 8AZ Lower part of rear spoiler to body | F54 | 7.6 Nm | ||
| 9AZ Bulkhead cover | F54/F48/F49/F60 | 3 Nm | ||
| 10AZ Mounting from hood seal, sideways | F48/F49/F60 | 3 Nm | ||
| 11AZ Vehicle underbody cover at side | F52/F57 | Hexagon screw | 3 Nm | |
| Plastic nut | 2.6 Nm | |||
| 12AZ Front cowl panel seal on cowl panel | F57 | 3 Nm | ||
| 13AZ Base plate to body | F60 | 8 Nm |