3341 Wheel Bearings
TIGHTENING TORQUE SPECIFICATION (WHEEL BEARINGS)
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wheel bearing to trailing arm | F54/F55/F56/F57/F60 | M12 | Joining torque and angle of rotation must be observed without fail. Replace screws. |
|
| Joining torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 2AZ Wheel bearing (hub) on output shaft | F54 ALL/F60 ALL | M16 | Joining torque and angle of rotation must be observed without fail. Replace screw. |
|
| Joining torque | 210 Nm | |||
| Angle of rotation | 90° |