36 10 Wheels
WARNING: This page is about a different variant/trim than selected.
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ Wheel bolts |
F54 / F55 / F56 / F57 / F60 |
M14 / 17 A/F |
- Screw in the wheel bolts and evenly tighten by hand in a crosswise sequence in order to center the wheel rim.
- Tighten the wheel bolts to the specified tightening toque in a crosswise sequence using a calibrated torque wrench.
- Check all wheel bolts in the same sequence and retighten to the prescribed tightening torque if necessary.
|
140 Nm |