LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mini
>>
2017
>>
Cooper Base, 2D Convertible, Automatic Trans
>>
Repair and Diagnosis
>>
Body & Frame
>>
Exterior/Interior Trim
>>
Body Equipment - Repair (F57)
>>
51 12 Bumper, Rear
>>
Removing and installing the bumper footwell trim, rear (Cooper Convertible)
>>
REP-TAT-P-5112-02 Installing the bumper cover lower section
REP-TAT-P-5112-02 Installing the bumper cover lower section
Follow-up work
Install rear
BUMPER COVER
Install the left and right
TAIL LIGHTS
Check bumper cover lower section (1) for damage and, if necessary, replace it.
Engage bumper cover lower section (1) into all the detents along the dotted line.
Courtesy of BMW OF NORTH AMERICA, INC.
NOTE:
Perform the steps on the right and left side.
Mount the expanding rivets (1).
Courtesy of BMW OF NORTH AMERICA, INC.