63 31 020 Removing and installing/replacing footwell light (Cooper Convertible)

Special tools required: 

• 64 1 020

Removal: 

Footwell, left: 

Lever out the footwell light (1) in the highlighted position using special tool 64 1 020.

Disconnect associated connector and remove footwell light (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Footwell, right: 

Lever out the footwell light (1) in the highlighted position using special tool 64 1 020.

Disconnect associated connector and remove footwell light (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Bottom of door: 

Lever out the footwell light (1) in the highlighted position using special tool 64 1 020.

Disconnect associated connector and remove footwell light (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• Note: BULB TYPE .
• LED technology lights must be completely replaced.

Installation: 

Footwell, left: 

Connect associated connector and join footwell light (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Footwell, right: 

Connect associated connector and join footwell light (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Bottom of door: 

Connect associated connector and join footwell light (1).

Courtesy of BMW OF NORTH AMERICA, INC.