63 17 070 Removing and installing/replacing left fog light (Cooper Convertible)
Preliminary work needed:
- Partially release front left WHEEL ARCH COVER .
Removal:
Unlock and disconnect the connector (1).
Loosen screws.
Feed out fog lights (2) toward side.
Installation:
Feed in fog light (2) and tighten at screws.
Tightening torque 63 17 1AZ .
Connect the connector (1).
Required follow-up work:
- Secure front left WHEEL ARCH COVER .
On replacement of fog light or bumper cover at front:
If necessary, remount bulb(s).
Adjust front FOG LIGHTS .