Removing and installing/replacing front left or right auxiliary turn signal lamps (Cooper Convertible)

Special tools required:

WARNING: Follow instructions for handling LIGHT BULBS (EXTERIOR LIGHTING) .

Removal:

Raise the hood.

Release detent of auxiliary turn signal lamp (1) at rear of side panel with special tool 00 9 325.

Remove auxiliary turn signal lamp (2) from side panel.

Unlock and disconnect associated connector.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Guides and clamp on auxiliary turn signal lamp (1) must not be missing or damaged.

Courtesy of BMW OF NORTH AMERICA, INC.

Connect associated connector.

Position auxiliary turn signal lamp (1) at side panel (2) and engage.

Courtesy of BMW OF NORTH AMERICA, INC.