11 62 Exhaust manifold
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust manifold with exhaust turbocharger to cylinder head | B38M0/U0 / B36M0 | M7 | Observe screwing sequence (refer to procedure for REMOVING/INSTALLING/REPLACING TURBOCHARGER
) (5 passages necessary) |
|
| 1. Joining torque | 10 Nm | |||
| 2. Joining torque | 10 Nm | |||
| 3. Joining torque | 16 Nm | |||
| 4. Joining torque | 16 Nm | |||
| 5. Joining torque | 16 Nm | |||
| 2AZ Trim strip at the cylinder head | 38M0/U0 / B36M0 | M7 | ||
| 1. Join | 10 Nm | |||
| 2. Join | 16 Nm | |||
| 5. Final torque | 16 Nm | |||