REP-TAT-P-5218-02 Installing the outer cover on the front seat
- Attach the retaining strap (1) in the outer cover (2).
- Feed in outer cover (3) into the guides (4) from front.
- Tighten the screws (1).
Tightening torques
TIGHTENING TORQUE SPECIFICATION
| Screw | tightening torque 1.5 Nm |
- Tighten the screw (2) from the bottom.
Tightening torques
TIGHTENING TORQUE SPECIFICATION
| Screw | tightening torque 1.5 Nm |