REP-TAT-P-5218-01 Removing the head restraint

Preliminary work 

Remove TRIM  for backrest release

Remove the REAR PANEL  from the front seat backrest

Remove the TRIM  at the bottom of the aperture

• Loosen screw (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unclip impact plate (1) in the marked areas (2) using the special tool 2 298 505  .
• Feed out the impact plate (1) from the support (3) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

• Push the lock (1) and pull out and remove the head restraint (2) in the arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.