REP-TAT-P-5111-01 Remove front bumper cover

Courtesy of BMW OF NORTH AMERICA, INC.

• Only in vehicles with build level up to:  March 2021
  NOTE: Perform the steps on the right and left side.
• Release wheel arch trim (1) from detents (2) and clips (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Only in vehicles with build level starting from:  March 2021
  NOTE: Perform the steps on the right and left side.
• Wheel arch trim (1) from the detents along the dotted line.
• Release wheel arch trim (1) from clips (2).
• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Perform the steps on the right and left side.
• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Only in vehicles with build level up to:  March 2021
• Loosen screws (1).
• Pull the bumper cover (2) slightly forward with the help of another person.
• Unlock and disconnect all plug connections depending on equipment specification.
• Remove the bumper panel (2) to the front with the help of another person.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Only in vehicles with build level starting from:  March 2021
• Loosen screws (1).
• Pull the bumper cover (2) slightly forward with the help of another person.
• Unlock and disconnect all plug connections depending on equipment specification.
• Remove the bumper panel (2) to the front with the help of another person.

  Courtesy of BMW OF NORTH AMERICA, INC.