Installing/replacing license plate (without number plate baseplate) (Cooper Convertible)

Special tools required: 

• 2 359 574

Place template 2 359 574 on license plate and center.

Mark and drill/punch drilled holes on license plate.

Deburr bores on the license plate.

Courtesy of BMW OF NORTH AMERICA, INC.

Position template 2 359 574 on bumper cover and align using the marks (1).

Align template horizontally.

Mark drilled holes on bumper cover.

Remove template.

Mount license plate to bumper cover using license plate screws and the corresponding protective caps.

Courtesy of BMW OF NORTH AMERICA, INC.