63 99 273 Replacing bulb for turn signal, front left (Cooper Convertible)

WARNING: Follow instructions for handling LIGHT BULBS (EXTERIOR LIGHTING) .

Removal:

Release cover (1) by counterclockwise turn and remove from wheel arch cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Release end cover (1) by counterclockwise turn and remove from headlight (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Release light holder (1) on detents (2) and pull out of headlight (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Release bulb for turn signal (1) on detents and pull out of light holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Join bulb for turn signal (1) in light holder (2).

NOTE: Note: BULB TYPE .

Courtesy of BMW OF NORTH AMERICA, INC.

Join light holder (1) in headlight (3).

NOTE: Light holder is secured against incorrect assembly.

Courtesy of BMW OF NORTH AMERICA, INC.

Join end cover (1) in headlight (2) and turn clockwise up to stop.

NOTE: Make sure cover (1) is correctly locked.

Courtesy of BMW OF NORTH AMERICA, INC.

Join end cover (1) in wheel arch cover and turn clockwise up to stop.

NOTE: Make sure cover (1) is correctly locked.

Courtesy of BMW OF NORTH AMERICA, INC.