63 99 225 Replacing bulb for front left or right position light (Cooper Convertible)
WARNING:
Follow instructions for handling LIGHT BULBS (EXTERIOR LIGHTING) .
Removal:
Release cover (1) by turning counterclockwise and remove from wheel arch trim panel (2).
Unlock and disconnect the connector (1).
Pull bulb socket (1) out of position light.
Pull out bulb for position light (1) from bulb socket (2).
Installation:
NOTE:
Note: BULB TYPE
.
Insert bulb for position light (1) into bulb socket (2).
Join bulb socket (1) in position light.
Connect the connector (1).
Join cover (1) in wheel arch trim panel (2), and turn clockwise up to stop.
NOTE:
Make sure cover (1) is correctly locked.