63 21 180 Removing and installing/replacing left or right tail light (Cooper Convertible)

Preliminary work needed: 

• Remove TAIL LIGHT COVER .

Removal: 

Loosen screws.

Remove tail light (1) towards rear.

Unlock and disconnect associated connector.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Connect connector and join tail light (1) in side panel.

Tighten the screws.

Tightening torque 63 21 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install TAIL LIGHT COVER .