63 21 060 Replacing bulb socket for left or right tail light (Cooper Convertible)
WARNING:
Follow instructions for handling LIGHT BULBS (EXTERIOR LIGHTING) .
Preliminary work needed:
- Open cover in trunk SIDE TRIM PANEL .
Removal:
Release lock by pressing it together and remove bulb socket (1) from tail light (2).
Replacement only:
Remount bulbs (1-3).
Do this by carefully pressing bulb (1-3) into bulb socket (4) and turning counterclockwise.
Then pull out bulb (1-3) from light holder (4).
Insert bulb (1-3) into new bulb socket (4).
Then carefully press bulb (1-3) into light holder (4) and turn clockwise up to stop.
Installation:
Insert light holder (1) in tail light (2).
NOTE:
Ensure light holder (1) is correctly fitted and locked in tail light (2).
Preliminary work needed:
- Close cover in trunk SIDE TRIM PANEL .