63 17 075 Removing and installing/replacing right front fog light (Cooper Convertible)

Preliminary work needed: 

• Remove front BUMPER COVER .

Removal: 

Loosen screws.

Remove fog light (1) from holder.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Join fog light (1) in holder and tighten with screws.

Tightening torque 63 17 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

On replacement of fog light or bumper cover at front: 

• If necessary, remount bulbs
• Adjust FOG LIGHTS .

Required follow-up work: 

• Install front BUMPER COVER .