REP-TAT-P-6161-01-F56 Removing wiper arm
NOTE:
Damage to the wiper console
The wiper console can break if the wiper arm is removed without the special tool.
The wiper console can break if the wiper arm is removed without the special tool.
- Only remove the wiper arm with the described special tool.
- Do not lever out the wiper arm, as this can cause the wiper console to brake at the predetermined breaking point for the pedestrian protection.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Pull off protective cap 1 .
- Loosen nut 2 .
- Detach wiper arm 1 with special tool 0 495 805 (61 6 130) .