REP-TAT-P-6120-02-F56 Connecting the battery ground lead
- Connect the connector 3 to the IBS and lock it audibly.
- Mount battery ground lead 2 on the negative battery terminal.
- Tighten nut 1 .
TIGHTENING TORQUE SPECIFICATION
| Battery terminal clamp on battery terminal | |
|---|---|
| M6 | Tightening torque 5 Nm |
- Feed in the windshield panel cover 3 .
- Turn locks 2 clockwise up to stop.
- Tighten down cap nuts 1 .
TIGHTENING TORQUE SPECIFICATION
| Fairing panel cover | |
| 2.8 Nm | |