63 12 010 Removing and installing (replacing) (Xenon) headlight

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 MINI Cooper Countryman, 2015 MINI Cooper Countryman, 2014 MINI Cooper Countryman, 2013 MINI Cooper, and 2012 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Danger to life due to high voltage. Therefore, before removing, disconnect all components from the voltage supply (lighting system and ignition off).

Work on the entire xenon lighting system (ignition device, control unit and bulb) may only be carried out by qualified technicians.

Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Release screws (1). Tightening torque 63 12 1AZ .

Disconnect plug connection (2).

Pull headlight forwards slightly and disconnect hose connection (3) from high-pressure nozzle (4).

Remove headlight.

Fig 1: Identifying Plug Connection, Hose Connection, High-Pressure Nozzle And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Adjust GAP DIMENSIONS by means of adjusting screws (1)

Adjust HEADLIGHTS

Fig 2: Identifying Headlights Adjusting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Modify XENON BULB FOR HEADLIGHTS
Modify BULB FOR TURN INDICATOR
Modify CONTROL UNIT FOR XENON HEADLIGHT .
Modify HIGH-PRESSURE NOZZLE of headlight cleaning system
Modify adjusting screws