51 46 050 Removing and installing/replacing top cover on tail panel

Remove warning triangle.

Release screws (1) and remove warning triangle holder.

If necessary, release expanding rivets (2).

Fig 1: Locating Retaining Tabs

Courtesy of BMW OF NORTH AMERICA, INC.

Release cover (2) from clips (1) and lift out.

Installation note: 

Make sure edge protection (3) is correctly seated.

Fig 2: Identifying Edge Protection, Cover And Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Replace faulty clips (1) on cover (2).

Fig 3: Identifying Clips On Cover

Courtesy of BMW OF NORTH AMERICA, INC.