51 16 165 Removing and installing/replacing complete center console

When working with trim panels, be sure not to scratch or damage visible surfaces (e. g. with sharp-edged tools).

Necessary preliminary tasks:

Not for version with telephone:

For versions with a 12 V power socket:

Not with telephone optional equipment:

Release screws (1) and remove rear center console cover rearwards (2).

Tightening torque 51 16 6AZ .

Fig 1: Identifying Rear Center Console Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) from center console (2), front.

Tightening torque 51 16 7AZ .

Fig 2: Identifying Center Console And Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Detach center console (1) at rear right and left.

Feed out center console (1) past parking brake lever and set down.

Fig 3: Identifying Center Console

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining clips (2) of center console (1) must not be damaged or missing.

Watch out for the wiring harness installation arrangement.

Fig 4: Identifying Center Console And Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.