51 16... Removing and installing/replacing decorative ring on gearshift lever cover

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Unclip frame trim (1) at marked locations and remove.

Fig 1: Identifying Gearshift Lever Cover Frame Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Retaining tabs (1) of frame trim (2) must not be damaged or missing.

Fig 2: Identifying Frame Trim Retaining Tabs

Courtesy of BMW OF NORTH AMERICA, INC.