51 41... Removing and installing/replacing front (inside) left or right door opener cover

Special tools required:

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Lever out and remove the door opener cover (1) with special tool 00 9 327 , as shown.

Fig 1: Removing Door Opener Cover With Special Tool (00 9 327)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining tabs (1) on door opener cover (2) must not be missing or damaged.

Fig 2: Identifying Retaining Tabs On Door Opener Cover

Courtesy of BMW OF NORTH AMERICA, INC.