26 11 Propeller Shaft. complete
TIGHTENING TORQUE SPECIFICATIONS - PROPELLER SHAFT COMPLETE
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Propeller shaft plugged into transfer box PTO (insert nut) | R60 ALL | Torque | 75 Nm | |
| 2AZ Rear flexible disc to rear axle final drive | R60 ALL | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| Jointing torque Angle of rotation |
25 Nm 60° + 10° |
|||
| 3AZ Flexible disc, rear, to propeller shaft | R60 ALL | Replace bolts and nuts Jointing torque and angle of rotation must be observed without fail | ||
| Jointing torque Angle of rotation |
43 Nm 60° |
|||
| 4AZ Center mount to body | R60 ALL | 21 Nm | ||
| 5AZ Front propeller shaft to rear propeller shaft | R60 ALL | 60 Nm |